PH15 Transparent Gloss PVC Paint Protection Film with Self-healing Topcoat

It's glossy structure, transparency and price makes it the best choice in relevant market segment. This vinyl film must be applied in wet method ONLY, using water /soap mixture / alcohol mixture. 

▲ High grade polymeric

▲ High transparency and clearness

▲ Self-healing for slight scratch, anti-oil pollution and dirt

Physical Properties 

Classification		Unit	Spec	Remark
Thickness	Top protected film	mm	0.05± 0.005	PET/PVC
	Surface materials	mm	0.15± 0.005	PVC-Polymeric
	Glue	mm	0.015 ± 0.002	Solvent based
	Release liner	mm	0.075 ± 0.01	-
Surface		－	Transparent	-
Width		M	1.52	－
Length		M	15	－

Physical Performance 

Features		Test Method	Results
Holding power		paste on steel board, hang on by 1kg weight under 25℃ and 65%, GB4851	≥ 12 hours
Initial tack		20 Minutes under 25℃ and 65%, GB4852	≥ No.5 steel ball
Peel adhesion		paste on steel board, 180° 20 Minutes under 25℃and 65%, GB2792	≥1.2kg/inch
Release force		paste on steel board, 90° 25℃ and 65%, GB2792	10 ~15g/inch
Shelf life		25℃and 65%	1-2 years
Application temperature		/	+20℃ to +25℃
Temperature range		/	'-20℃ to +80℃
Humidity Resistance		120 hours exposure	No Detrimental Effect
Saltspray Resistance		120 hours exposure	No Detrimental Effect
Water Resistance		120 hours immersion	No Detrimental Effect
Chemical Resistance		1hour diesel oil immersion,4hours antifreeze immersion	No Detrimental Effect

 

Shelf life: 2 years from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. Optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.

Common Applications:

▲ Protection of the highly sensitive external surfaces of the vehicle like; bumper, side mirrors, hood, headlight & wheel arches.

▲ Protection of internal surfaces like, luggage racks or chairs in busses or trains

▲ Protection of surfaces in high traffic areas like, reception desks, door impact areas, wall panels and more

▲ Partial colour change to high gloss black to accentuate specific car parts like roof, mirrors, hood and more

Important Notice:

Information on physical and chemical characteristics and values in this document are based upon tests we believe to be reliable and do not constitute a warranty. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material to their specific use. All technical data are subject to change. In case of any ambiguities or differences between the English and foreign versions of this document, the English version shall be prevailing and leading.

Warranty, Limited Remedy, and Disclaimer:

Unless an additional warranty is specifically stated on the applicable VinylFrog product packaging or product literature, VinylFrog warrants that each VinylFrog product meets the applicable VinylFrog product specification at the time VinylFrog ships the product. VinylFrog MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the VinylFrog product does not conform to this warranty, then the sole and exclusive remedy is, at VinylFrog’s option, replacement of the VinylFrog product or refund of the purchase price.

Limitation of Liability:

Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from the VinylFrog product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.