High Glossy Bean Red Vinyl Wrap

Structure

Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protect the underneath vinyl and its called protection layer. After that the high grade polymeric vinyl supported with pressure sensitive acrylic adhesive. Lastly there is a layer of 160g double sided silicon coated release liner. 

 

Material

• High Grade Polymeric Calendared Vinyl Film
• Fashionable, Stunning Color

• With Air Release Channel
• Bubble-free Application

• Slideable; Repositionable

Medium Stretchable

The Maximum is 30 %

Functions

Recommended Uses

▲ Standard Size & Appearance

Classification		Unit	Spec	Remark
Thickness	Top protected film	um	36±2%	PET/PVC
	Surface materials	um	115±2%	High-grade PVC-Polymeric
	Glue	um	30±2%	High-quality Solvent-based
	Release liner	um	180±2%(paper)/ 130±2%(plastic)	－
Surface		－	Opaque	－
Width		mm	1520±0. 01%	－
Length		mm	1800+1%	－

 

Physical properties 

▲ General Properties

Features		Test Method	Results
Release force N/25mm		25℃ and 50%	0.12
Initial tack g/25mm		under 26℃ and 64%, GB31125-2014	987
Peel Strength N/25mm		25℃and 42%, GB/T2792-1998	7.25
Holding power(h)		25℃ and 50%, GB/T4851-1998	72.09
Shelf life		stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place	2 years
Application temperature		/	+20℃ to +30℃
Aging Test 1		7 days under 65°C	No adhesive residue with heat
Aging Test 2		10 days under 65°C	No adhesive residue without heat
Shrinkage		/	less than 4%

 

High Glossy Bean Red Vinyl wrap is a great way to add some excitement to your vehicle. With this high gloss, extremely durable vinyl you can redefine the look of your car or truck. This high-quality vinyl is a much better alternative to removing your factory paint and repainting. The vinyl is made from an adhesive-backed film that requires no messy glue or rubbing alcohol to apply. This material works well in applying to cars, trucks, and boats and looks great with most color schemes.

It is available in different sizes so you can choose the perfect size for your vehicle. The color is bright and crisp and reflects the light beautifully. It's also extremely durable and can withstand temperatures up to 500 degrees Fahrenheit. It will not lift or bubble even after years of exposure to the elements.

This is perfect for use on vehicle windows or interior parts that need to be seen through. The black backing allows light to pass through, so it is not completely opaque. It also helps to reduce glare and make your vehicle look amazing! The material is waterproof and UV resistant which makes it great for interior parts or exterior surfaces like hoods, roofs, or bumpers where moisture might get trapped.

Features High Glossy Bean Red Vinyl Wrap

• High Gloss, Red Vinyl Film
• Easy to Apply with 3M Tape
• Highly Durable & Scratch Resistant

The color is a true red, not orange or pink. The sun hits it at different angles and you can see the reflection. It's very classy looking and it looks great on any car.

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.